Insulation Removal Perth is typically a task best handled by professionals. It can be a messy job and if there are pests or rodent droppings in the insulation it can be hazardous to your health as well.
Spreading plastic over your furniture in the living spaces and using a drop cloth will help limit the mess. You will also need a high powered commercial grade vacuum to remove blown in insulation.
Insulation Removal is the process of safely and effectively removing old or damaged insulation from your home’s walls, ceilings and attic. This can be necessary for a variety of reasons, including pest infestation, moisture damage and poor energy efficiency. Insulation removal also allows for new insulation to be properly installed, maximizing the effectiveness and benefits of your insulation.
Insulating your home can be a major investment, but it is one that can save you money on your energy bills and increase the value of your home when you decide to sell. In addition, it can provide significant health and safety benefits for your family.
Old insulation can be a breeding ground for pests like rodents and squirrels. If left unattended, these rodents can chew through the insulation and create nests in your attic, causing potential structural problems and unhealthy air quality in your living space. Replacing your attic insulation will help prevent this, as well as reducing the chances of other pests invading your house.
Waterlogged insulation, such as wet cellulose or fiberglass, can cause mold, which can be dangerous to your health and the structure of your house. It can also lead to rot and decay in the walls, attic or ceilings of your home. It is important to replace wet insulation promptly, and to have proper moisture and rot inspections done afterward to ensure the areas are properly repaired.
If your home has older insulation made from asbestos or other potentially dangerous materials, you should have it removed professionally to avoid the risk of exposure. A professional will have special equipment to safely remove these types of materials without exposing you or your family to any dangers.
Most types of insulation are fairly easy to remove. Fiberglass batts and rolls are the easiest, as they can be simply ripped out of place and discarded. Blown-in insulation, on the other hand, can be a difficult project to take on yourself. The best method for removing blown-in insulation is to have a professional come in with an insulation vacuum, which will allow the old insulation to be quickly and easily sucked out of the attic and into a bag for disposal.
Why do I need to remove it?
Insulation removal might not be at the top of your priority list, but it’s something that should be done to keep the efficiency and comfort of a home or commercial building. If the insulation in your attic is damaged, or simply out of date, you might be wasting money on higher energy bills and lower indoor air quality.
Old and outdated insulation is often exposed to moisture, causing mold growth, which can also lead to structural damage to the attic and the rest of the house. Removing the damaged insulation and replacing it with new cellulose or fiberglass can help prevent this from occurring.
Insulation is designed to prevent heat from escaping your home in the winter and heat from entering in the summer. If the existing insulation is damaged or contaminated, it will no longer do this job effectively, leading to increased heating and cooling bills. By removing the old insulation and replacing it with new, breathable cellulose, you can save money on your energy bills while enjoying greater indoor air quality and a more comfortable home.
It’s important to hire a professional when it comes time for insulation removal. Disturbing or handling old insulation can release harmful particles into the air, including dust, mold spores, and animal waste, which can then circulate throughout your home. Professional insulation contractors like 1907 Insulation have specialized equipment to safely and quickly remove old insulation, making sure that these dangerous particles are not released into the living areas of your home.
In addition, older insulation may contain hazardous materials, such as asbestos or redent waste, which aren’t something you want to mess around with. Hiring a professional ensures that these materials are handled and disposed of correctly, protecting the health and safety of your family and staff.
Finally, getting rid of old insulation paves the way for other improvements you might be looking to make to your attic and home. Adding new cellulose insulation can create an air seal in the attic, keeping conditioned air in and reducing energy bills. This can be especially helpful for older homes, as traditional fiberglass insulation doesn’t stop air from escaping through the attic floor into your living space.
How do I remove it?
If you’re planning to re-insulate your home, it is important to remove existing insulation before installing new. Insulation that is too old and inefficient can result in higher energy bills, poor HVAC unit performance and moisture related issues throughout your home. In some cases, it may be possible to re-insulate over the top of old insulation without removing it entirely. However, in most instances it is best to remove the older insulation completely.
The removal process will vary depending on the type of insulation installed in your home. For example, if you have batt or blown in insulation, it will be easiest to remove by vacuuming the material off the roof and into bags for easy disposal. Spray foam insulation can be more difficult to remove as it is a permanent fixture in your walls and requires a knife or saw for removal.
Prior to the insulation removal process, you will need to stage your equipment and supplies in a garage, driveway or on the lawn to avoid damaging your home or personal belongings. You will also need to prepare the work site and your home by clearing a path from your front door to the attic access and covering the floor and walls along that path with a protective material. You will also need to set up a ladder underneath the attic access.
Once you’re ready to begin, put on your personal protective gear. This will include a mask to reduce the risk of contaminants entering your lungs. If the insulation is fiberglass, you should also wear long sleeved clothing and take a shower once you’re finished with the project.
Begin the process by turning on your commercial vacuum and routing the hose through your home in to the attic. Place waste bags inside the attic. Once you’ve cleared all the contaminated insulation from the attic, take the HEPA filtered shop-vac (if you’re not using a commercial vacuum) and rakes and dustpans into the attic to clear up the remaining debris. When you’re finished, place the collected insulation into a waste bag for disposal.
Do I need to hire a professional?
If you’re thinking about replacing old insulation in your home, it is recommended that you hire a professional to perform the work instead of trying to do it yourself. The insulation removal process can cause serious problems for you if you attempt to take on the task without proper equipment or training. Hiring a professional allows you to avoid these issues and can save you money in the long run.
When old insulation is removed, it is likely to stir up dust, mold spores, and other allergens that can harm your indoor air quality. This can lead to sneezing, coughing, and other respiratory problems. In addition, improper removal of insulation can cause dangerous asbestos to be released into the air. This can be very harmful to your health and may even lead to cancer. Hiring a professional will ensure that all of these allergens are contained and properly disposed of, protecting you and your family’s health.
Insulation often contains hazardous materials like fiberglass and asbestos, depending on the type of insulation in your home. Performing the removal yourself can expose you to these hazardous substances and can pose significant health risks for your family. When performed by a professional, your old insulation can be safely removed and recycled, minimizing the risk of harmful particles entering your home.
Moreover, if your attic insulation has been exposed to moisture, there is a high likelihood that mold will form in the future. This is a huge health issue and can be very difficult to remove on your own. When left unchecked, this can cause structural damage in your attic and throughout your home.
Additionally, rodents love to make their nests in attic insulation and can leave behind a variety of contaminants, including fecal matter. If you try to remove the insulation yourself, you could end up exposing yourself to these contaminants and spreading them around your home through pheromones and other scents. Hiring a professional will eliminate these problems and make the process much easier for you. They will have the right tools and expertise to handle the job quickly and efficiently, saving you time and preventing costly mistakes.