Roofing is a critical part of your home’s protection system. It shields your house from rain, snow, sunlight, and extremes of heat and cold. Contact Prestige Exteriors now!
If you’re planning to have a new roof installed, prepare your yard by mowing the grass and moving patio furniture away from the house. The roofing crew will need to walk all around your roof, so make sure there’s a clear path without tripping hazards.
Shingles are flat, rectangular pieces of roof covering material, usually made from asphalt or composite shingles. They’re installed on residential houses in overlapping courses, creating a barrier that protects the home from rain, snow and other elements. While shingles aren’t as sturdy as other types of roofing, they provide excellent water resistance.
The shingle is what people think of when they hear “roofing,” but there’s more to a roof than meets the eye. The rafters and trusses that make up the roof structure offer several benefits to homeowners: a structural support for the roof, protection from fire and wind, and exterior aesthetics.
There are many different types of shingles. Most are designed to mimic different styles of roofs, from old-world to modern, and can be used to complement any design aesthetic. The most common shingle today is the asphalt shingle, which can be found on about 80% of all homes. Its basic construction is a fiberglass mat with an asphalt coating, and it’s available in a variety of colors.
Another type of shingle is the wood shingle, which can be made from a variety of woods, including cypress and western red cedar. They may be sawed from a single piece of wood, or they might be cut in multiple parts and then joined together. These shingles are usually kiln-dried, which helps them resist warping and decay. They can also be shaped, allowing them to be used in curved roofs.
A third type of shingle is the premium or designer shingle, which offers a high-end aesthetic and can be designed to replicate other styles. These shingles are typically thicker and have a special coating to increase their fire-resistance. They can also come in a wide array of colors, from natural earth tones to contemporary reds and greens.
Before you choose a shingle, make sure the contractor you hire has a good track record and is accredited by your local shingle manufacturer. They should also be licensed, insured and bonded. Also, ask your roofing contractor about the size of your roof and how many shingles are needed to cover it. This information will help you determine how much to expect to pay for the project.
Flat Roofs
Flat roofs aren’t as simple as they sound. They’re actually not completely flat, but rather have a low incline, so that water can drain. Without the incline, the roof would collect water in pools, leading to leaks and water damage inside the building. This type of roofing is most often seen on commercial buildings, but there are options for residential use as well.
A flat roof can be made from a variety of materials, but the most common is a single-ply membrane. This type of roof is designed to be a waterproof barrier that is also durable and easy to maintain. These roofs can be built in a variety of shapes, sizes and colors. Many of them are also UV-resistant, which helps to keep the sun’s harmful rays from damaging the roof.
Because flat roofs can be prone to pooling water and leakage, it’s important to have proper maintenance and inspections. This can include regular inspections, cleaning, and maintenance work like sealing seams. Additionally, using a roof coating can help to prevent the buildup of water-soluble materials and extend the life of the flat roof.
Another benefit of flat roofs is that they are easier to access than pitched roofs, making it simpler to inspect and perform maintenance. This can help to save money on repairs in the long run, especially if you have to pay for expensive structural repair work due to storm damage or severe weather conditions.
Finally, a flat roof can provide extra space on top of the building for things like patios and terraces. This can be a great option for homes on small blocks that can’t fit outdoor entertaining areas on their lawns, or homeowners who want to store large equipment like heating systems and water tanks out of sight.
Aside from their practical uses, flat roofs are also a stylish design feature that can make a house or business stand out. These roofs can be used to create a sleek and modern aesthetic, or they can be matched with other features of the architecture for a more unified look.
Roll Roofing
Roll roofing is a budget-friendly solution that’s typically used for sheds, garages, lean-tos, and other smaller structures. It is a mineral-surfaced asphalt product that comes in 100 square-foot rolls. It’s also a popular choice for covering temporary structures and re-roofing existing roofs that have been covered with shingles in the past.
This type of roofing is easy to install, making it a good option for DIYers. However, it’s important to schedule a professional to ensure the job is done correctly. This is because the application requires precision measurements and prior experience with the material used, which can vary depending on the roll roofing product chosen.
To begin the process of installing rolled roofing, the roof surface must be clean and free from any debris. Then, a layer of either felt or synthetic underlayment should be applied to the roof surface. This protects the sheathing against water penetration and improves the longevity of the rolled roofing. Next, the first sheet of rolled roofing should be laid and overlapped with the second. The seams should be sealed with roofing cement or an asphalt-based roof sealant. After this step, a reflective roof coating can be applied to the roll roofing.
There are several types of roll roofing available on the market, and each has a unique set of benefits and drawbacks. For example, EPMD rolled roofing is a low-cost waterproofing option that’s also recyclable and fire-resistant. However, it does not provide the same design aesthetic or lifespan as shingle or metal roofing materials.
When considering roll roofing for your home, it’s important to consider the specific needs of the project and local climate conditions. This will help you determine if the product is right for your roof and will give you an idea of the lifespan you can expect.
The best way to maintain the lifespan of a roll roofing system is by keeping up with regular maintenance and performing necessary repairs. This includes cleaning gutters and downspouts to prevent water backup and preventing the buildup of snow, which can cause the roof to collapse under the weight. It’s also important to perform a routine inspection of the roll roofing to look for any signs of wear, tear, or damage.
Metal Roofs
Metal roofs are a popular roofing choice, offering superior benefits over shingle or tile alternatives. They’re strong and durable, able to stand up to severe weather conditions such as hurricanes or tornadoes. They also help save energy costs, by reflecting the sun’s heat rather than absorbing it. Finally, they’re aesthetically pleasing, with the ability to look much like traditional tiles or shingles.
A wide range of styles and materials are available for homeowners seeking to add a metal roof to their home. Some of the most common are aluminum, steel, and zinc. Each has its pros and cons, depending on the individual homeowner’s needs and preferences.
Aluminum is lightweight, making it less stressful on the structure of a home. However, it can dent more easily than other types of metal. It is also susceptible to corrosion when it comes into contact with moisture.
Zinc is an alternative to aluminum that can be formed into different shapes for unique roof designs. It’s more expensive than aluminum, but it lasts longer and won’t rust. However, it’s also more prone to expansion and contraction, which can cause cracking or warping.
Stainless steel is another option for those looking to add a metal roof to their home. This is because it has a beautiful finish and looks more like traditional shingles than other types of metal roofing. It’s also resistant to rust and corrosion, and it can be painted to match the rest of the home’s exterior.
Regardless of the type of metal roof chosen, it’s important that any roofing contractor working on the project is skilled and has experience in installing and repairing them. Attempting to do a DIY roof install or repair isn’t usually recommended, as there are many steps involved that must be done properly in order for a metal roof to function correctly. This includes proper installation and sealing, as well as correct use of fasteners. If any of these components are incorrectly used or installed, it can result in corrosion and degradation that can shorten the lifespan of the roof significantly.